X1E
DiscontinuedBambu's enterprise and engineering flagship. The X1E took the X1 Carbon platform and added an actively heated 60°C chamber, a 320°C hardened-steel hotend, and a full enterprise networking stack: Ethernet, WPA2-Enterprise Wi-Fi, physical kill-switches and off-cloud LAN-only operation. Discontinued March 2026 as part of the X1 series wind-down. For a current active-chamber engineering printer, see the H2S, H2D or X2D.
Bambu ended the X1E (and the whole X1 series) on 31 March 2026. It is no longer sold new. For current active-chamber engineering printers, see the H2S ($1,249), H2D ($1,899) or X2D ($649).
Should I buy the X1E?
The X1E is discontinued. It was built for enterprise and engineering teams that needed an active chamber plus secure, off-cloud networking. If you specifically need those enterprise controls (Ethernet, WPA2-Enterprise, LAN-only operation), look for a used or clearance unit. For a new machine with an active heated chamber, the H2S ($1,249) and H2D ($1,899) are the current picks; the X2D ($649) is the direct X1-series successor with a 65°C active chamber for far less.
| Motion & Print | |
|---|---|
| Build volume | 256 × 256 × 256 mm |
| Max speed | 500 mm/s |
| Acceleration | 20,000 mm/s² |
| Motion system | CoreXY |
| Layer resolution | 0.05–0.35 mm |
| Extruder | Direct drive |
| Nozzle (stock) | 0.4 mm hardened steel |
| Temperature & Enclosure | |
|---|---|
| Nozzle max | 320°C |
| Bed max | 110°C |
| Enclosure | Yes, fully sealed |
| Chamber heating | Active, up to 60°C |
| HEPA filter | Yes |
| Carbon filter | Yes |
| Bed surface | Textured PEI (magnetic) |
| Lidar sensor | Yes (first layer & flow) |
| AI failure detection | Yes (Vision + spaghetti detection) |
| Auto leveling | Yes (Lidar-assisted) |
| Vibration comp. | Yes (accelerometer) |
| Flow calibration | Yes (Lidar) |
| Camera | Yes (included) |
| AMS | AMS compatible (1st gen, up to 16 colors) |
| Connectivity | Wi-Fi, Ethernet (RJ45), WPA2-Enterprise |
| Security | Physical kill-switches, off-cloud / LAN-only mode |
| Weight | ~14.6 kg |
| Power supply | 100–240V AC |
| Status | Discontinued (March 2026) |
The X1E was Bambu's answer to enterprise and engineering buyers who liked the X1 Carbon but needed more: an actively heated 60°C chamber for demanding materials, a 320°C hardened-steel hotend, and a security and networking stack aimed at IT departments: Ethernet, WPA2-Enterprise Wi-Fi, physical kill-switches, and the ability to run fully off-cloud on a local network. At $2,499 it was priced for organizations, not hobbyists.
Its real differentiators were the active chamber and the enterprise controls. The 60°C heated chamber made ABS, ASA and higher-temperature engineering filaments far more reliable than the passive X1 Carbon, while LAN-only operation and kill-switches addressed data-security requirements that ruled out cloud-connected printers in some environments.
Now that it is discontinued, its role is filled by the H-series. The H2S ($1,249) and H2D ($1,899) both offer an active 65°C chamber, higher 350°C temps and larger build volumes, and the X2D ($649) is the direct X1-series successor with a 65°C active chamber. Buy a used or clearance X1E only if you specifically need its off-cloud enterprise networking package.
Pros
- Active 60°C heated chamber: reliable ABS/ASA and engineering filaments
- 320°C hardened-steel hotend for higher-temp materials
- Lidar first-layer calibration and flow sensing
- AI Vision + spaghetti/failure detection
- Enterprise networking: Ethernet (RJ45), WPA2-Enterprise Wi-Fi
- Off-cloud / LAN-only operation with physical kill-switches
- Fully sealed enclosure with HEPA + carbon filtration
- AMS up to 16 colors
Cons
- Discontinued March 2026. No longer sold new
- $2,499 list price: enterprise pricing, hard to justify for hobby use
- H2S ($1,249) and H2D ($1,899) now offer active chambers for less
- X2D ($649) is the direct successor at a fraction of the price
- 256 mm build volume, same as much cheaper printers
- Single nozzle: no dual-material or IDEX printing
- 1st-gen AMS only
The X1E was the only Bambu printer built specifically for corporate IT environments. Its enterprise package covered the requirements that keep cloud-connected consumer printers out of secure networks:
| Feature | What it does |
|---|---|
| Ethernet (RJ45) | Wired network connection for reliability and managed networks. |
| WPA2-Enterprise Wi-Fi | Connects to corporate/campus 802.1X networks, not just home WPA2-PSK. |
| Off-cloud / LAN-only mode | Full operation without any cloud connection, for air-gapped or restricted networks. |
| Physical kill-switches | Hardware toggles to cut connectivity, for data-sensitive environments. |
| Material | Support | Notes |
|---|---|---|
| PLA / PLA+ | Excellent | Lidar calibration makes already good PLA prints even better. |
| PETG | Excellent | Lidar catches any first-layer adhesion issues early. |
| ABS / ASA | Excellent | Active 60°C chamber makes these first-class, better than the passive X1 Carbon. |
| TPU (flexible) | Supported | Direct drive handles flexible filament well. |
| Nylon / PA | Good | Active chamber and 320°C hotend handle many PA grades. Dry filament essential. |
| CF / GF composites | Hardened nozzle | Hardened-steel nozzle stock. Active chamber helps layer adhesion on CF-PA. |
| PC | Workable | 320°C hotend and active chamber handle many PC grades better than passive machines. |
| PA-CF (high-temp) | Workable | 320°C is enough for many grades; the toughest high-temp composites want more. Consider H2S/H2D (350°C). |
Active chamber for ABS/ASA: Let the chamber reach 60°C before starting. Unlike passive enclosures, the X1E actively heats, so warping risk drops significantly on large engineering parts. Set the bed to 100°C for ABS.
Lidar calibration: Let the full first-layer Lidar scan run on every print. It adds a couple of minutes but catches bed offset issues before you waste filament.
LAN-only / off-cloud mode: Enable LAN Only in Settings to run without any cloud connection. Combined with Ethernet and the kill-switches, this keeps the X1E inside a restricted network. Connect Orca Slicer via local IP and access code.
WPA2-Enterprise: For 802.1X corporate networks, enter the enterprise credentials in the network setup rather than a plain Wi-Fi password. Wired Ethernet is the more reliable option in managed environments.
What replaced the X1E? There is no one-for-one replacement. For an active heated chamber, the H2S ($1,249) and H2D ($1,899) are the current engineering picks, and the X2D ($649) is the direct X1-series successor with a 65°C active chamber. None fully replicate the X1E's off-cloud enterprise networking package.
X1E or X1 Carbon? Both are discontinued. The X1E added an active 60°C chamber, a 320°C hotend and enterprise networking over the passive X1 Carbon. If you need those, the X1E was the one to have; otherwise the cheaper X1C covered the same core platform.
Why was it so expensive? The $2,499 price reflected the enterprise positioning: active chamber, 320°C hardened hotend, and the networking/security stack aimed at corporate IT. It was priced for organizations, not hobbyists.
Can I still run it off-cloud? Yes. The X1E's LAN-only operation, Ethernet, WPA2-Enterprise and physical kill-switches still work on existing units. That off-cloud capability is the main reason to seek out a used or clearance X1E today.