A2L
The biggest A-series printer yet. The A2L pairs a 330 × 320 × 325 mm build volume (roughly 105% more space than the A1) with the same open-frame simplicity and a budget $439 price. A single direct-drive nozzle with a built-in filament cutter feeds AMS lite for multi-color work (up to 19 colors with box-style AMS units added), and an optional Cutting Upgrade Kit turns it into a Cricut-style plotter for vinyl, stickers and paper. No heated chamber and no Lidar: this is a high-volume budget machine, not an engineering one.
Should I buy the A2L?
Yes, if you want the most build volume you can get on a budget. At $439 the A2L gives you a 330 × 320 × 325 mm bed (about 105% more than the A1) with the same beginner-friendly open-frame setup and AMS lite multi-color support. The optional Cutting Upgrade Kit ($69) is a genuine differentiator at this price: the only other Bambu printers that take the same kit are the H2 series, from $1,049. Skip it if you need to print ABS, ASA or Nylon reliably (no heated chamber, bed tops out at 80°C, so it is a PLA/PETG/TPU machine), or if you want Lidar-grade first-layer sensing (there is none).
Links to Amazon are affiliate links. We may earn a commission at no extra cost to you.
Store price and the 90-day low
Official Bambu Lab US store, checked November 3, 2026.
| Configuration | US store price |
|---|---|
| A2L | $439 |
| A2L Combo | $519 |
| 90-day low, A2LOct 27 to Nov 6, 2026 | $439 |
The 90-day low is the lowest price in our daily log of the US store, Aug 9 to Nov 6, 2026.
Full specifications
- Isometric view.
- Source: Bambu spec page bambulab.com/en-us/a2l/specs, checked 2026-10-07
| Build volume | 330 × 320 × 325 mm (13 × 12.6 × 12.8 in) |
|---|---|
| Max speed | 500 mm/s |
| Acceleration | 10,000 mm/s² |
| Motion system | Bed-slinger |
| Layer height (0.4 mm nozzle) | 0.08–0.28 mm (Bambu Studio default range) |
| Extruder | Direct drive |
| Nozzle (stock) | 0.4 mm |
| Filament cutter | Yes (integrated) |
| Nozzle max | 300°C |
|---|---|
| Bed max | 80°C |
| Enclosure | No (open frame) |
| Heated chamber | None (open frame) |
| Bed surface | Textured PEI (magnetic) |
|---|---|
| Auto leveling | Yes |
| Vibration comp. | Yes (Adaptive) |
| Flow calibration | Yes (automatic) |
| Lidar sensor | No |
| Camera | Yes (timelapse) |
| AMS | AMS lite; 19 colors with 1 AMS lite + up to 4 box AMS |
| Cutting Upgrade Kit | Optional ($69): drag knife + pen module |
| Connectivity | Wi-Fi 2.4 GHz, Bambu-Bus, LAN mode, no Ethernet port |
| Power supply | 100–120V or 200–240V AC (regional versions), max 1000W |
Who should buy the A2L?
Large PLA and PETG printsGood fit
330 × 320 × 325 mm is the largest build volume in the A series, and Bambu says the open frame primarily targets PLA and PETG. A2L vs A1 (Bambu A2L FAQ)
Crafts and cuttingGood fit
The optional Cutting Upgrade Kit adds a cutting module and a pen module for vinyl, stickers and paper; the H2 series is the only other Bambu line that takes it. A2L vs H2S
ABS, ASA and engineeringLook elsewhere
Open frame and a bed limited to 80°C, which Bambu chose on purpose for PLA and PETG; we would go to the enclosed P2S. A2L vs P2S (Bambu A2L FAQ)
Upgrading from the A1Depends
You gain 330 × 320 × 325 mm over 256 × 256 × 256 mm, but the bed tops out at 80°C instead of 100°C. A2L vs A1
Known issues
- The bed tops out at 80°C by design: Bambu says a hotter bed this size would draw too much power for a home circuit. (Bambu A2L FAQ)
- Wi-Fi is 2.4 GHz only. (Bambu A2L FAQ)
Known issues only from Bambu's own wiki, firmware release notes, FAQ, blog and recall pages, checked October 2, 2026. Specs: our table above and Bambu's spec pages.
Verdict
The A2L takes the friendly, open-frame A-series formula and stretches it to a genuinely large 330 × 320 × 325 mm build volume (the biggest in the A-series and roughly 105% more than the A1) while holding the line on price at $439 ($519 with AMS lite). If your bottleneck has been bed size on a budget printer, this is the cheapest way to solve it inside the Bambu ecosystem.
The optional Cutting Upgrade Kit is the wildcard. For $69 the A2L becomes a Cricut-style plotter that cuts vinyl, stickers and paper and can draw with a pen module. For makers, classrooms and small craft businesses, a large-format 3D printer that doubles as a cutting plotter is a compelling two-in-one that Bambu otherwise only sells in the H2 series, at more than twice the price.
The trade-offs are the usual A-series ones, amplified by scale. There is no enclosure and no heated chamber (the bed maxes out at 80°C) so this is a PLA, PETG and TPU machine, not an ABS/ASA/Nylon one. There is no Lidar, and the single direct-drive nozzle means multi-color still uses AMS lite purge-and-swap. If you want engineering materials or an active chamber, look at the X2D ($589) or H2S ($1,049). But for high-volume, budget-friendly PLA/PETG printing with an optional plotter twist, the A2L stands alone.
Pros & Cons
Pros
- Largest A-series build volume: 330 × 320 × 325 mm (~105% more than A1)
- Budget price: $439 standalone, $519 with AMS lite
- Optional Cutting Upgrade Kit ($69): Cricut-style vinyl/sticker/paper plotter + pen module
- Integrated filament cutter on the direct-drive nozzle
- Multi-color: 1 AMS lite + up to 4 box AMS, 19 colors
- Adaptive vibration compensation
- Camera for timelapse
- Beginner-friendly open-frame setup
Cons
- No enclosure and no heated chamber (bed 80°C): PLA/PETG/TPU only
- No ABS, ASA or Nylon reliably: not an engineering printer
- No Lidar first-layer / flow sensing
- Single nozzle: multi-color still uses AMS purge-and-swap
- Cutting Kit is a separate $69 purchase
- Large open bed needs the space and a draft-free spot
- Launched June 2026, long-term reliability still TBD
Material compatibility
Filled circle: works well. Half: capable, or only with upgrades. Empty: not recommended.
| Material | Support | Notes |
|---|---|---|
| PLA / PLA+ | Excellent | The A2L's core use case. Large bed is ideal for big PLA prints and multi-part plates. |
| PETG | Excellent | Handled well on the open frame. 80°C bed gives good adhesion. |
| TPU (flexible) | Supported | Direct drive handles flexible filament well. |
| ABS / ASA | Not recommended | No enclosure or heated chamber. Warping and cracking on an open frame. Use an enclosed printer (X2D, P2S). |
| Nylon / PA | Not recommended | Needs an enclosure and dry filament. Not suited to an open-frame machine. |
| PC | Not supported | Not on Bambu's supported filament list for the A2L. The P2S and X2D list PC. |
| CF / GF composites | Hardened nozzle | PLA-CF and PETG-CF are workable with a hardened nozzle. High-temp CF grades need an enclosed machine. |
Open-frame reality check: The A2L is built for PLA, PETG and TPU. If most of your printing is those materials and you want a big bed at a low price, it is a great fit. If you need ABS/ASA/Nylon or engineering-grade parts, choose an enclosed, chamber-heated printer instead.
Setup tips
- Give it room
- The 330 × 320 mm bed slings back and forth. Leave clearance behind the printer and put it on a stable, level surface so large prints don't wobble at speed.
- Draft-free spot
- Open frame means no chamber protection. Keep the A2L out of drafts and away from open windows or AC vents to avoid first-layer and adhesion issues on large PLA/PETG plates.
- Cutting Upgrade Kit
- When switching to the drag-knife/pen module, calibrate the head offset once and keep a spare cutting mat. Treat vinyl and cardstock jobs like plotter work, not print jobs: feed material flat and secured.
- Expanding to 19 colors
- One AMS lite plus up to four box-style AMS units give up to 19 colors; with a box AMS attached, one AMS lite slot is unavailable. More colors mean more purge waste on a single-nozzle machine, so plan a purge/poop bin and expect longer prints on color-heavy models.
Common questions
A2L or A1?
A2L if you want the extra build volume (330 × 320 × 325 mm vs 256 mm) or the optional cutting plotter. A1 at $259 if 256 mm is enough and you want to save $180. Both are open-frame PLA/PETG machines with AMS lite.
A2L or P2S?
P2S at $449 if you need an enclosure for ABS/ASA and a more contained build. A2L at $439 if you print mostly PLA/PETG, want a much bigger bed, and like the cutting-plotter option. They target different jobs: big open-frame volume vs enclosed engineering-ish printing.
Can the A2L print ABS or Nylon?
Not reliably. There is no enclosure and no heated chamber; the bed tops out at 80°C. It is designed for PLA, PETG and TPU. For ABS, ASA or Nylon, choose an enclosed printer like the X2D or P2S.
What is the Cutting Upgrade Kit?
An optional $69 accessory that turns the A2L into a Cricut-style cutting plotter. It adds a drag-knife module and a pen module to cut vinyl, stickers, cardstock and paper, or draw, reusing the printer's motion system. Besides the A2L, only the H2 series takes the same kit.
How many colors can it print?
One AMS lite plus up to four box-style AMS units (such as the AMS 2 Pro) in series give up to 19 colors. Since it is a single-nozzle printer, color changes use purge-and-swap, so expect more waste and longer prints on color-heavy models.
Does the A2L have Lidar?
No. It uses standard auto-levelling and automatic flow calibration, plus a camera for timelapse. Lidar first-layer/flow sensing was an X1-series feature; no printer in Bambu's current lineup has it (the X1 series reached end-of-life on March 31, 2026).
A2L vs A1: what changed
| Feature | A1 | A2L |
|---|---|---|
| Price (standalone) | $259 | $439 |
| Price (Combo) | $359 | $519 |
| Build volume | 256 × 256 × 256 mm (10.1 × 10.1 × 10.1 in) | 330 × 320 × 325 mm |
| Nozzle | 1 Direct Drive + filament cutter | 1 Direct Drive + filament cutter (better) |
| Bed max | 100°C | 80°C |
| Enclosure | No | No |
| AMS | AMS lite, or up to 4 AMS via hub (not together with the AMS lite) | AMS lite (19 colors with box AMS) (better) |
| Cutting plotter kit | No | Optional ($69) |
| Vibration comp. | Yes | Yes (Adaptive) (better) |
The A2L is essentially a supersized A1: much more build volume, plus the option to add a cutting plotter. For $180 more standalone (the Combos are also $160 apart), the extra space alone makes it worth it if you print large. If 256 mm is enough for you, the A1 stays the cheaper pick.
Starter accessories for the A2L
What we would add to a new A2L in the first month.
SUNLU FilaDryer S2
The A2L is open frame, so filament picks up moisture from room air. Dry PETG and TPU before long prints on the big bed.
TEQStone Bed Adhesive
Large prints grip the A2L's textured plate hard. A thin glue layer works as a release agent and protects the surface.
Overture TPU 95A
Flexible 95A TPU that feeds reliably. A good match for large gaskets, grips, and seals on the A2L's 330 mm bed.
Affiliate links. We may earn a commission at no extra cost to you.
Compare this printer
Links to Amazon are affiliate links. We may earn a commission at no extra cost to you.
Related reading
- OrcaSlicer 2.5 Alpha and RC: H2C and A2L SupportOrcaSlicer 2.5 brings H2C and A2L profiles and mixed nozzle sizes on the H2D and X2D. Alpha, beta and the November 1...
- A2L Print-Then-Cut: Stickers From Your PhoneFirmware 01.01.05.00 adds Print-Then-Cut to the A2L: print on an office printer, photograph two printed markers in...
- A2L Cutting Module: The Bambu That Also CutsThe A2L's optional $69 Cutting Upgrade Kit adds a Cricut-style drag knife and pen module. Cut vinyl, stickers...
- Bambu Lab A2L: Largest A-Series Printer Yet, $469Bambu Lab launched the A2L on June 1, 2026: a 330×320×325 mm build volume (about 105% more than the A1), $469, open...
Sources
4 sources, including Bambu Lab product pages and Bambu Lab wiki. Last checked November 3, 2026.
ShowHide
- Bambu Lab US store, A2Lbambulab.com/en-us/a2lStore and Combo prices, checked November 3, 2026
- Bambu Lab A2L tech specsbambulab.com/en-us/a2l/specsSpecifications, checked October 2, 2026
- Bambu Lab Wiki, A2L firmware release historywiki.bambulab.com/.../a2l-firmware-release-historyFirmware version and date, checked November 3, 2026
- BambuHub daily store logbambuhub.net/bambu-price-tracking90-day low, our daily check of the US store
What changed
Newest first, from this page's version history. Only changes to text you can read here; date refreshes and reshuffled reading links are left out.
- Daily price log now includes the Black Friday prices of October 27.
- Bambu US store price update: A2L $439 (was $469), H2S $1,049 (was $1,199), A2L Combo $519 (was $569), X2D $589 (was $649), A1 $259 (was $299), P2S $449 (was $549), A1 Combo $359 (was $399).
- Spec table: layer height is now 0.08 to 0.28 mm, the Bambu Studio default range for the 0.4 mm nozzle (was 0.05 to 0.35 mm); connectivity is Wi-Fi 2.4 GHz, Bambu-Bus and LAN mode, no Ethernet port.
Earlier changes
12 older entries, Jul 8, 2026 to Oct 4, 2026.
ShowHide
- Comparison table: the A1 column now lists the filament cutter and up to four AMS via the hub, not together with the AMS lite (was AMS lite only).
- Lidar note corrected: it was an X1-series feature and no current Bambu printer has it, the X1 series having reached end-of-life on Mar 31 (was "reserved for higher-end models").
- Added Who should buy and Known issues (80°C bed by design, 2.4 GHz Wi-Fi only) from Bambu's FAQ, plus firmware 01.01.05.00 and the $469 store price. Estimated accessory prices removed.
- Corrected: 19 colors means one AMS lite plus up to four box-style AMS units (was four chained AMS lite), and the Cutting Upgrade Kit also fits the H2 series (was unique to the A2L).
- Specs checked against Bambu: power supply 100 to 120V or 200 to 240V AC by region, max 1000W (was 100 to 240V); PC is now listed as not on Bambu's supported filament list for the A2L.
- Price gap to the A1 corrected to $170, standalone and for the Combos (was $70).
- A1 bed max corrected to 100°C in the comparison table (was 65°C); the A2L is no longer described as having a slightly hotter bed.
- Comparison table: A1 prices corrected to $299 standalone and $399 Combo (was $399 and $499).
- Cutting Upgrade Kit price now $69 throughout (was about $60).
- H2S price in the verdict corrected to $1,199 (was $1,249).
- A1 price in the comparison corrected to $299 (was $399).
- Added Starter accessories for the A2L with three picks: SUNLU FilaDryer S2, TEQStone Bed Adhesive and Overture TPU 95A.
- Model
- A2L
- Page
- Type
- New: June 2026, Largest A-series volume
- Last updated
- Editor
- BambuHub editorial
- Sources
- Listed above
- Status
- Not affiliated with Bambu Lab